级别 | A级 | 成分 | 无碱 |
---|---|---|---|
用途 | 适合于挤出造粒工艺 | 包装 | 托盘 |
类型 | 无碱 |
无碱无捻热塑长纤用直接纱
产品简介:Product Description:
1.由“E”玻璃制成的连续纤维粗纱,适合于挤出造粒工艺。
E-glass Continous roving,designed for use in extrusion process.
2.适用于增强PP ,PA , PBT ,PET ,ABS等热塑性塑料。
Applicable for reinforcements of thermoplastics, such as PP,PA ,PBT ,PET ,ABS ,etc.
3.硅烷型浸润处理剂。
Silane-Based Sizing.
产品特点:Characteristics
1具有良好的耐磨性,毛丝少。
High Abrasion Resistance,Low Fuzz.
2纤维密度稳定,具有高的单丝强度。
Consistent Linear Density with High Tensile Strength.
3可提高复合材料的机械性能。
Improving Composites Mechanical Properties.
技术指标:Technical Data
产品名称 Product Name | TEX | Yield | 单丝直径μm Filament | 烧失量 Loss on lgnition% | 树脂类型 Resin System
|
塑料增强纱 E-Glass Direct Roving For Thermoplastics | 1000 | 500 | 14 | 0.25 | 通用型 (General Purpose) |
1000 | 500 | 14 | 0.25 | PA | |
1000 | 500 | 14 | 0.25 | PP | |
1000 | 500 | 14 | 0.25 | PBT |
注:1可根据客户要求提供个性化产品。2,以上数据仅供参考
Individualized specification is available as per customer’s request.
包装:
中天俊达所生产的合股无捻粗纱,每个纱团用聚酯热塑料袋或缠绕膜进行包装,然后放入托盘或纸箱。每个托盘可码放64个纱团,每个纱团重9-18kg。托盘堆高不大于2层,纸箱堆高大于5层。
Packing:
E-glass direct roving is packed in thermoplastic or PE bags and stacked on pallets or separately put in cartons. Each pallet stacks 64 rolls each roll 9-18kg . Pallets should not be more than 2 layers and cartons not in more than 5 layers.
贮存:
产品应堆放于干燥凉爽处,防止淋雨,建议储存温度控制在5℃-35℃,湿度35%-65%,使用前放置在温室24小时以上为效果最好,建议接到产品后6个月内使用完。若不用,请勿打开包装或扎紧包装口,以免受潮。
Storage:
This product should be stored in a dry ,cool and rainproof place,with temperature from5℃ to 35℃ and humidity between 35% and 65%.It is recommended to be put under room temperature for over 24 hours prior to use,finished within 6 months after receipt by customer and kept in intact package when not used to avoid damp.